Cradlepoint MBR1200 Manual do Utilizador descarregar pdf (Página 24)

CRADLEPOINT MBR1200 | USER MANUAL Firmware ver. 1.6.12

As an alternative, you can locate a MAC address in a specific

operating system by following the steps below:

 Windows 98/Windows Me. Go to the computer‟s Start

menu, select Run, type in winipcfg, and hit Enter. A

popup window will be displayed. Select the appropriate

adapter from the pull-down menu and you will see the

Adapter Address. This is the MAC address of the device.

 Windows 2000/Windows XP/Windows 7. Go to the

computer‟s Start menu, select Programs, select

Accessories, and select Command Prompt. At the

command prompt, type in ipconfig /all and hit Enter.

The physical address displayed for the adapter connecting to the router is the MAC address.

 Mac OS X. Go to the computer‟s Apple Menu, select System Preferences, select Network, and select the Ethernet Adapter connecting

to the router. Select the Ethernet button and the Ethernet ID will be listed. This is the same as the MAC.

Save/Update. Record the changes you have made.

Clear. Re-initialize this area of the screen, discarding any changes you have made.

When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and

permanent.

Example: A DHCP reservation is used for making sure the router always gives a computer or device the same IP address. Let‟s say you have a

Wi-Fi printer that you want to access via the Internet. You can connect to the CradlePoint Router from the Wi-Fi printer designated in this section.

1. Enter a designated IP address somewhere between the Starting IP and Ending IP addresses.

2. Click the Copy Your PC’s MAC Address button and the MBR1200 will detect the MAC address of the device and enter it automatically.

3. The printer name can be entered in for reference but is not required.

4. Click the Save Settings button at the top of the page.

The IP address will now only be assigned to the designated Wi-Fi printer and it will always receive the same IP address as long as it uses the

same wireless adapter.

Default: No static DHCP clients.

NOTE: If you replace the wireless adapter in a computer that is using Static DHCP, you will need to click the Copy the PC‟s MAC Address button

again because every wireless adapter has a unique MAC address. The same goes for any network device. If you replace a network device such

as a print server, you will need to input the MAC address of the new print server into the Static DHCP configuration.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 131 132

Sem comentários

Cradlepoint MBR1200 Manual do Utilizador Página 24